Krack Levitor II Air-Cooled Condenser LAVF-12310KA

Description

Krack Levitor II Air-Cooled Condenser LAVF-12310KA
Model
LAVF-12310KA
Serial
MY12E028667
208-230 3 phase
Unit Type: Levitor condenser
Tube Diameter: 3/8"
Fan Discharge Directions: Vertical
Fan / Motor Combination: 1140 RPM, 1.5 HP, 30"
Fans Wide: 1
Fans in Line: 2
Rows Deep: 3
Fins Spacing: 10 FPI
Voltage: 208-230/3/60
Weight 779 lbs
Benefits and Features
The LEVITOR system addresses refrigerant coil wear and leaks due to vibration and thermal stress. LEVITOR Coil Design Eliminates Refrigerant Tube Wear
Environmental concerns and spiraling cost of refrigerants have led to the development of direct drive remote air-cooled condensers with the LEVITOR coil support system. This innovative design uses dedicated stainless steel tubes and a unique coil support system to isolate refrigerant tubes from the unit. Coil support is transferred from the fins to the stainless tubes and truncated tube plates which ride freely in “C” channels. Tubes expand and contract without interference. The result, contact and friction wear are eliminated.
Quiet by Design
LEVITOR coil design does more than just eliminate tube wear. Sound reduction is an added benefit. Unlike traditional air-cooled condensers, fan and coil vibration are isolated from the cabinet, so it is not transmitted to the unit frame and building supports.
Manufacturers Specs and Manual
https://www.krack.com/ns/Technical-Documents/LEVC.pdf