Plug & Play PID Temperature Controller Box Kiln Probe Pottery Glass Annealing

Description

This plug and play temperature controller with Ceramic thermocouple, has a wide range of applications in controlling the temperature of Kilns, Ovens, Furnaces & ….
(for loading current up to 15Amp) . This is an inexpensive and heavy duty plug and play controller box. Please consider that if you need to change your sensor to specific one, I can change it for you too.
It is One set point temperature controller and if you need ramp and soak please see my other products.
All products are 100% Brand new, High performance and Top quality.
Controller comes in Box with
MANUAL
.
Guarantee your
Insured
Undamaged
shipping by purchasing from a Canada located seller.
Ready for Immediate Shipment.
Features & Specifications
:
·
Its heavy duty kiln thermocouple can measure very high temperatures up to 1300C (equals to 2372
°F
).
·
Equipped with male and female connector, so you can easily change your thermocouple.
·
To operate, you only need to plug the heater to the socket wire of the controller at the back, drop the sensor into the Kiln, turn on the power of controller and adjust it to your own requirements.
·
15 Amp Maximum current
·
Heavy duty input and output plug and socket wire
·
Equipped with
circuit breaker
switch 15Amp (instead of short life fuse)
·
Equipped with 40amp SSR with Heat sink
And more:
High Measuring accuracy
, ±0.2% or ±1 unit of full input range
Celsius
or
Fahrenheit
display selected on user’s discretion.
Calibration function
for sensor temperature correction ,
Specifications
:
Input voltage
90 to 260 VAC - 50 /60 Hz; No transformer or adapter is required.
Output voltage
Same as the input. with one set point temperature controller
Maximum Current
15A
Controller Mode
1)
:P, PID ,PI, PD, ON/OFF(P=0)
2) Auto setting control
Output switching device
Solid State Relay (40A - 24/240V AC) with zero voltage crossing switching.
Sensor Type
Type K 6pc Ceramic Kiln Thermocouple
Temperature control range
-50 to 1300 °C (-58 to 2372 °F)
Thermocouple Thread material
Cr-Ni, Si-Ni
Thermocouple Thread dimensions
3.2mm (diameter ɸ) x 190 mm (long) / (0.13" x 7.5")
Sensor cable length
3.3 ft (1m)
Ceramic tube shape
6 x (1 inch Pcs, two-hole insulator) Ceramic Tube
Ceramic tube diameter
Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”)
Ceramic tube length
~150 mm (~ 6.0 inch)
Box material &
Dimension
ABS  200x120x75mm ( 7 3/4 x 4 3/4 x 3" )
Temperature resolution
Dual 4-digit LED display, 0.1 for K type and 0.001 for analog input
Temperature display unit
Fahrenheit (°F) Celsius (°C)
Temperature accuracy
Measurement: ±0.2%FS
Control Accuracy
:+/- 1 Celsius
Input
K (-200~+1300ºC)
.
But the controller can connect to following input too,
S (-50~+1600ºC), Wu3-Re25 (0~2000ºC ), R (-50~+1700ºC), T (0~400ºC), E (0~900ºC), J (0~800ºC), B (200~1800ºC), Pt100 (-200~800.0ºC) or (-200~+600ºC), mV,mA,VDC (-1999~+9999)
Notes for customer outside North America,
For international order, an US power cord is included. User can cut plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output.
For countries that use 220-240VAC power line, the maximum control power of this controller is 15Amp 3300 Watts.
Our shipping service is fast for example:
shipping to USA is 3-6 business days
shipping to England and Ireland is 4-7 business days
shipping to other Europe Countries 5-10 business days
shipping to Canada is 2-7 business days
shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)